France, FRA

to suit 3 •5-10 ton excavator • with load holding valve • closing force 29kN • opening width 1206mm • weight 300kg

to suit 7 •5-14 ton excavator • with load holding valve • closing force 48kN • opening width 1500mm • weight 520kg

OMNIBIB

to suit 7 •5-14 ton excavator • with load holding valve • closing force 48kN • opening width 1500mm • weight 520kg

to fit 8 - 14 ton excavators • CE Marked

to fit 3 •5 - 9.5 ton excavators • CE Marked

to fit 3 •5 - 9.5 ton excavators • CE Marked

to fit 10 - 17 ton excavators • CE Marked

to fit 3 •5 - 9.5 ton excavators • CE Marked

to suit 2-5 to mini excavator • Oil flow: 40-80 l/min • operating pressure: 170-250 bar max • Copy of declaration of conformity available • 170kg

Flotation 648 • Tubeless

TM1000HP

YIELDBIB-VF

AXIOBIB 2

to suit 4-8 ton excavator • with 45mm pin system (wide 160mm • pin to pin 260mm) • Operating pressure 108-137 bar • hydraulic flow range 40-70 L/min • Copy of declaration of conformity available 270 kg

AGRIMAX RT65M

TM1000HP

SFT

YIELDBIB-VF

to suit 1-3 ton mini excavator • with load holding valve • closing force 10kN • opening width 850mm • weight 101kg

to suit 1-3 ton mini excavator • with load holding valve • closing force 10kN • opening width 850mm • weight 103kg

to fit 1.5 - 5.5 ton excavators • CE Marked

to fit 1.5 - 5.5 ton excavators • CE Marked

to fit 1.5 - 5.5 ton excavators • CE Marked

to fit 1.5 - 5.5 ton excavators • CE Marked

to fit 5.2 - 11.5 ton excavators • CE Marked

to suit 2 •5-4 •5 ton excavator • with 35mm pin system (wide 150mm • pin to pin 240mm) and extra Pin 40mm (150mm) • with extra plate • Operating pressure: 90-120 bar • hydraulic flow range 25-50 L/min • Copy of declaration of conformity available 200 kg

c/w auger bit to suit 1 •5-4 ton excavator • Operating pressure: 60-220 bar • Oil flow rate: 15-50 l/minCopy of declaration of conformity available • 80kg

cone splitter • to suit 3-7 ton excavator • 96kg

OMNIBIB

to suit 2 •5-5 •5 ton mini excavator • with load holding valve • closing force 19kN • opening width 944mm • weight 200kg

to suit 2 •5-5 •5 ton mini excavator • with load holding valve • closing force 19kN • opening width 944mm • weight 200kg

to fit 4.2 - 9.5 ton excavators • CE Marked

to suit 7-12 ton excavator • closing force 24kN • max. operating pressure open/closed: 300 bar • min. oil volume open/closed: 15 l/min • opening width 1320mm • weight 400kg

Flotation 648 • Tubeless

to suit 1 •5-4 ton excavator • with 30mm pin system (wide 130mm • pin to pin 160mm) • and extra Pin 35mm (130mm) with extra plate • Operating pressure: 88-117 bar • hydraulic flow range 23-30 L/min • Copy of declaration of conformity available 150 kg

to fit 2.7 - 5.5 ton excavators • CE Marked

to fit 3 - 6.5 ton excavators • CE Marked

to fit 1.5 - 3.8 ton excavators • CE Marked