Ocana, ESP

to fit 1.5-4.5 ton excavator

to suit 1-2 ton mini excavator • with MS01 • weight 31kg

to suit 4-7 ton mini excavator • with MS03 • weight 42kg

(1) Auger • (1) 200mm Bucket • (1) 800mm Cleanup Bucket.

(1) Auger • (1) 200mm Bucket • (1) 800mm Cleanup Bucket.

to fit JPC Excavator

(1) Auger • (1) 200mm Bucket • (1) 800mm Cleanup Bucket.

(1) Auger • (1) 200mm Bucket • (1) 800mm Cleanup Bucket.

with 45mm pin system (wide 185mm • pin to pin 305mm) • weight 56kg • to suit 5-10 ton mini excavator

with 45mm pin system (wide 155mm • pin to pin 260mm) • weight 53kg • to suit 5-10 ton mini excavator

with 25mm pin system (wide 100mm • pin to pin 86 •3mm) • weight 33kg • to suit 0 •8-2 ton mini excavator

With 80mm Pin System • Weight 587kg • Fits 15-25 Ton Excavator

With 100mm Pin System • Weight 944kg • Fits 25-45 Ton Excavator

With 70mm Pin System • Weight 187kg • Fits 15-25 Ton Excavator

with 50mm pin system (wide 232mm • pin to pin 292mm) • weight 65kg • to suit 5-10 ton mini excavator

with 40mm pin system (wide 135mm • pin to pin 200mm) • weight 51kg • to suit 4-6 ton mini excavator

with 30mm pin system (wide 110mm • pin to pin 115mm) • weight 41kg • to suit 2-3 ton mini excavator

to fit JPC Excavator

to fit JPC Excavator

to fit JPC Excavator

to suit 7-9 ton excavator • weight 110kg • Swivel angle 2x90° • drive torque 7350kM • holding torque 17250NM • oil flow 12-20l/min • oil connection 1/4 inch • working pressure 210bar

with 65mm pin system • weight 184kg • to suit 10-15ton excavator

quick hitch • rake • graber •auger • 12inch auger rod • 8inch bucket • 32inch bucket

quick hitch • rake • graber • auger • 12inch auger rod • 8inch bucket • 32inch bucket

quick hitch • rake • graber • auger • 12inch auger rod • 8inch bucket • 32inch bucket

quick hitch • rake • graber • auger • 12inch auger rod • 8inch bucket • 32inch bucket

6 cyl • diesel

to suit 1-3 ton excavator • weigt 25kg • Swivel angle 2x90° • drive torque 930kM • holding torque 2260NM • oil flow 3-6l/min • oil connection 1/4 inch • working pressure 210 bar

to suit 5-6 ton excavator • weight 84kg • Swivel angle 2x90° • drive torque 4300kM • holding torque 10800NM • oil flow 6-12l/min • oil connection 1/4 inch • working pressure 210bar

to suit 3-4 ton excataor • weight: 52kg • Swivel angle 2x90° • drive torque 2870kM • holding torque 7270NM • oil flow 3-6l/min • oil connection 1/4 inch • working pressure 210bar