Ocana, ESP

**Intermittent starting motor**

CE Marked.

Fits 9 - 25 Ton Excavators

to fit 15 - 35 ton excavators

During inspection the unit run out of gas

Fits 15-24 Ton Excavator • Hydraulic Flow Range 90-120 L/min • Copy of Declaration of Conformity Available • 1300 kg

to fit 15 - 32 ton excavators

With loader bucket

to suit 8-12 ton excavator • Rotation 360° • Open/close operating pressure: 250-280 bar • Open/close oil flow rate: 50-70 l/min • weight 596kg

CE Marked. ** No Brakes • key lock is not working**

Forks won't fit the mast • side shift function is not operational

to suit 12-17 ton Excavator • Shell width 705mm • Weight 754kg

**Drivetrain would not engage**

CE Marked.

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator ton range from 5-9 tons. Max Opening: 12 in . Shear Opening 11 in 300mm • Shear depth 12 in 310mm.Weight: 1226 lb . Made of Swedish Hardox Hituf steel • good toughness and wear resistance. The pin is made of 42CrMo alloy steel with high strength and toughness;.

to suit 1-4 ton mini excavator • with rotation • weight 175kg

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator ton range from 24-40 tons. Max Opening: 30 in. Max Crushing Force: 150 tons. Weight: 5750 lb. Equipped with Swiss imported motor with rotation and imported HALLITE oil seal. Blades are both replaceable and reversible. With Swedish Hardox 500 steel • lightweight and wear-resistant. The pin is made of 42CrMo alloy steel with high strength and toughness; Full hydraulic cylinder protection thanks to the piston rod guard.360" endless hydraulic rotation allows optimal positioning and precise handing. Cutting blades are both replaceable and reversible.

Pile Driver • Fits 12-20 Ton Excavator • Copy of Declaration of Conformity Available • Weight 1005 kg

Suitable for Cat345 or 40-55 ton excavators. Capacity: 3.5 yd³. Weight: 6354 lb. 1.Oem standard bucket.2.Strong and durable construction to withstand robust working conditions.3.High quality materials:NM360/400、HARDOX450/500.4.Using high-strength steel plates • casting protective plates and blocks • and special processing techniques • the weld bead is widened and the service life is extended.

Suitable for Cat345 or 40-55 ton excavators. Capacity: 3.5 yd³. Weight: 6354 lb. 1.Oem standard bucket.2.Strong and durable construction to withstand robust working conditions.3.High quality materials:NM360/400、HARDOX450/500.4.Using high-strength steel plates • casting protective plates and blocks • and special processing techniques • the weld bead is widened and the service life is extended.

Fits 15 - 32 Ton Excavators

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator ton range from 20-30 tons. Max Opening: 32 in. Max Cuntting Force: 210 tons. Weight: 4718 lb. Equipped with a Swiss imported motor with 360 degree rotation and imported NOK oil seal. Blades are both replaceable and reversible. The integrated speed valve and piston rod guards also improved work efficiency.

to suit 8-14 ton Excavator • Shell width 605mm • Weight 540kg

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator ton range from 20-25 tons. Max Opening: 31 in. Max Crushing Force: 80 tons. Weight: 3347 lb. Equipped with Swiss imported motor with rotation and imported HALLITE oil seal. Blades are both replaceable and reversible. With Swedish Hardox 500 steel • lightweight and wear-resistant. The pin is made of 42CrMo alloy steel with high strength and toughness;

for 25-37 ton excavator • all new TOFT hydraulic breaker are supplied with two Moil-type chisel • two hoses • one Set Of N2 Nitrogen Charging Kit With N2 Bottle And Pressure Gauge • Toil Box With Maintenance Tools And Operations Manual

to fit 6 - 14 ton excavators

to fit 6 - 14 ton excavators

to fit 6 - 14 ton excavators

Suitable for Cat336 or 30-38 ton excavators. Capacity: 2 yd³. Weight: 3968 lb. 1.Oem standard bucket.2.Strong and durable construction to withstand robust working conditions.3.High quality materials:NM360/400、HARDOX450/500.4.Using high-strength steel plates • casting protective plates and blocks • and special processing techniques • the weld bead is widened and the service life is extended.

to suit 7-12 ton Excavator • Shell width 555mm • Weight 400kg

to suit 8-14 ton mini Excavator • Shell width 605mm • Weight 530kg

to suit 8-14 ton excavator • Shell width 605mm • weight 560kg

to suit 7-12 Ton Mini Excavator • Shell Width 555mm • Weight 390kg

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator ton range from 19-26 tons. Hose Dia: 1 in. Weight: 3034 lb. Chisel Dia: 135 mm .Includes: 1 circuit breaker • 135mm chisel • 2 oil hoses • 1 set of nitrogen cylinder nitrogen production device • 1 pressure gauge • 1 set of toolbox and necessary maintenance tools. The reinforcement plate of the hammer shell is lengthened to enhance its firmness

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator ton range from 19-26 tons. Hose Dia: 1 in. Weight: 3034 lb. Chisel Dia: 135 mm .Includes: 1 circuit breaker • 135mm chisel • 2 oil hoses • 1 set of nitrogen cylinder nitrogen production device • 1 pressure gauge • 1 set of toolbox and necessary maintenance tools。The reinforcement plate of the hammer shell is lengthened to enhance its firmness

to suit 7-12 ton Excavator • Shell width 555mm • Weight 410kg

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator ton range from 19-26 tons. Hose Dia: l in. Chisel Dia: 140 mm. Weight: 3968 lb .Includes: 1 circuit breaker • 140mm chisel • 2 oil hoses • 1 set of nitrogen cylinder nitrogen production device • 1 pressure gauge • 1 set of toolbox and necessary maintenance tools. The reinforcement plate of the hammer shell is lengthened to enhance its firmness

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator ton range from 19-26 tons. Hose Dia: l in. Chisel Dia: 140 mm. Weight: 3968 lb .Includes: 1 circuit breaker • 140mm chisel • 2 oil hoses • 1 set of nitrogen cylinder nitrogen production device • 1 pressure gauge • 1 set of toolbox and necessary maintenance tools。The reinforcement plate of the hammer shellis lengthened to enhance its firmness

Suitable for Cat336 or 30-38 ton excavators. Capacity: 2.3 yd³. Weight: 3567 lb. 1.Oem standard bucket.2.Strong and durable construction to withstand robust working conditions.3.High quality materials:NM360/400、HARDOX450/500.4.Using high-strength steel plates • casting protective plates and blocks • and special processing techniques • the weld bead is widened and the service life is extended.

Suitable for Cat336 or 30-38 ton excavators. Capacity: 2.3 yd³. Weight: 3567 lb. 1.Oem standard bucket.2.Strong and durable construction to withstand robust working conditions.3.High quality materials:NM360/400、HARDOX450/500.4.Using high-strength steel plates • casting protective plates and blocks • and special processing techniques • the weld bead is widened and the service life is extended.

Suitable for Cat336 or 30-38 ton excavators. Capacity: 1.5 yd³. Weight: 3492 lb. 1.Oem standard bucket.2.Strong and durable construction to withstand robust working conditions.3.High quality materials:NM360/400、HARDOX450/500.4.Using high-strength steel plates • casting protective plates and blocks • and special processing techniques • the weld bead is widened and the service life is extended.

to fit 3 •5 - 9.5 ton excavators

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator ton range from 17-24 tons. Weight: 1711lb. Using Q345 manganese plate steel • high strength and corrosion resistance. The pin is made of 42CrMo alloy steel • with built-in oil passage • high strength and good toughness. Using high-strength steel plates • casting protective plates and blocks • and special processing techniques • the weld bead is widened and the service life is extended.