Ocana, ESP

to suit 7-12 ton excavator • closing force 24kN • max. operating pressure open/closed: 300 bar • min. oil volume open/closed: 15 l/min • opening width 1320mm • weight 400kg

to suit 18-26 ton excavator • hydraulic flow range 130-150 L/min • 135mm chisel diameter • with 80mm pin system (wide 311mm • pin to pin 495mm) Copy of declaration of conformity available • 1620 kg

to suit 1-3 ton mini excavator • closing force 4.5kN • operating pressure open/closed: 200 bar • min. oil volume open/closed: 15 l/min • opening width 770mm • weight 95kg

Suitable for CAT307/307B/308/308B or 6-10 ton excavators.Max Opening: 15 in.Max Crushing Force: 80 tons.Weight: 948 lb

Suitable for CAT307/307B/308/308B or 6-10 ton excavators. Max Opening: 15 in. Max Crushing Force: 80 tons. Weight: 948 lb

to suit 10-18 ton excavator •with 65mm Pins System (wide 221mm • pin to pin 407mm) • with extra plate • Operating pressure: 147-167 bar • hydraulic flow range 80-110 L/min • Copy of declaration of conformity available 1050 kg

to suit 4-9 ton mini excavator • closing force 12 •6kN • max. operating pressure open/closed: 250 bar • min. oil volume open/closed: 15 l/min • opening width 1204mm • weight 255kg

to suit 15-20 ton excavator • hydraulic flow range 90-120 L/min •125mm chisel diameter with 70mm pin system (wide 287mm • pin to pin 463mm) Copy of declaration of conformity available 1400 kg

to suit 1-3 ton excavator • closing force 45kN • max. operating pressure open/closed: 200 bar • min. oil volume open/closed: 15 l/min • opening width 770mm • weight 95kg

to suit 10-18 ton excavator •with 80mm Pins System (wide 311mm • pin to pin 445mm) • with extra plate • Operating pressure 147-167 bar • hydraulic flow range 80-110 L/min • Copy of declaration of conformity available • 860 kg

Suitable for Cat320 /325 or excavator tonne range from 17-23 tons. Bottom Measurement: 52*35 in. Weight: 2174lb

Suitable for Cat320 or 17-24 ton excavators. Capacity: 1.2 yd. Weight: 2249 lb

Suitable for Cat320 or 17-24 ton excavators. Capacity: 1.2 yd. Weight: 2249 lb

Suitable for Cat320 or 17-24 ton excavators. Capacity: 1.3 yd. Weight: 2064 lb

Suitable for Cat320 or 17-24 ton excavators. Capacity: 1.3 yd. Weight: 2064 lb

to suit 2 •5-4 •5 ton excavator • with 35mm pin system (wide 140mm • pin to pin 165mm) • Operating pressure 88-117 bar • hydraulic flow range 25-50 L/min • Copy of declaration of conformity available 150 kg

Suitable forCAT307/307B/308/308B or 5-9 ton excavators. Max Jaw Opening: 55 in. Jaw Width: 17/10 in. Weight: 873 lb

Suitable for CAT345 or 40-49 ton excavators. Weight: 2460 lb

to suit 2 •5-4 •5 ton excavator • with 35mm pin system (wide 150mm • pin to pin 240mm) and extra Pin 40mm (150mm) • with extra plate • Operating pressure: 90-120 bar • hydraulic flow range 25-50 L/min • Copy of declaration of conformity available 200 kg

to suit 4-8 ton excavator • with 45mm pin system (wide 160mm • pin to pin 260mm) • Operating pressure 108-137 bar • hydraulic flow range 40-70 L/min • Copy of declaration of conformity available 270 kg

to suit 1 •5-3 ton excavator • with 30mm pin system (wide 125mm • pin to pin 125mm) • an extra Pin 35mm (115mm) • with extra plate • Operating pressure: 88-117 bar • hydraulic flow range 15-30 L/min • Copy of declaration of conformity available 120 kg

to suit 1 •5-2 •5 ton excavator • Operating pressure: 80-205 bar • Oil flow rate: 23-53 l/min • Copy of declaration of conformity available • 54kg

to suit 1 •5-4 ton excavator • Operating pressure: 60-220 bar • Oil flow rate: 15-50 l/min • Copy of declaration of conformity available • 80kg

to suit 1 •5-4 ton excavator • Operating pressure: 60-220 bar • Oil flow rate: 15-50 l/min • Copy of declaration of conformity available • 80kg

to suit 2 •5-5 •5 ton mini excavator • with load holding valve • closing force 19kN • opening width 944mm • weight 200kg

to suit 1 •5-4 ton excavator • with 30mm pin system (wide 130mm • pin to pin 160mm) • and extra Pin 35mm (130mm) with extra plate • Operating pressure: 88-117 bar • hydraulic flow range 23-30 L/min • Copy of declaration of conformity available 150 kg

Suitable for CAT336 or 30-38 ton excavators. Weight: 1640 lb

Suitable for CAT336 or 30-38 ton excavators. Weight: 1640 lb

Fits 1 •5-3 •5 Ton Excavator • Oil Flow (l/min) 25-35 • Operating Pressure 170 Bar • Weight 85kg • Cutting Diameter 150 mm

to suit 3-7 ton mini excavator • 600 mm blade • Operating pressure: 80-240 bar • oil flow 40-75 l/min • weight 77 kg

(cone splitter) to suit 1 •5-4 ton excavator • Operating pressure: 100-140 bar • Oil flow rate: 30-70 l/min • Copy of declaration of conformity available • 70kg

Suitable for Cat307/307B/308/308B or excavator tonne range from 4-9 tons. Bottom Measurement: 36*22 in.Weight: 692 lb

hyd breaker • 200mm digging buckets & 800mm cleanup bucket

hyd breaker • 200mm digging buckets & 800mm cleanup bucket

Suitable for CAT320 or 18-26 ton excavators. Weight: 952 lb