Edmonton, AB ,CAN

3 in Intake • 3 in Discharge • Centrifugal Honda GX240 1 Cylinder Gasoline Engine

Tier 3 • 2006 US EPA Label • Honda GX340 1 Cylinder 11 hp Gasoline Engine

12 V Transfer Pump • Automatic Shut-Off Nozzle • Hose

Multi-Fuel Fueled • Single Phase • 120 V Input

2150 psig • 2" x 2"

Hose • Pump

Set of 2 • 10 in 900 ANSI Engineered Test Heads with a Max Operating Pressure 2500 Psi. Designed to CSA Z662-11. These Test Heads have an engineered transition which is a 45 Degree elbow and 600 Ansi Flange

Brackets

Set of 2 • 10 in 900 ANSI Engineered Test Heads with a Max Operating Pressure 2500 Psi. Designed to CSA Z662-11. These Test Heads have an engineered transition on them

A Single Test Head • 10" 900 ANSI Engineered Test Head with a max operating pressure 2500 Psi. Designed to CSA Z662-11. This Test Head has an engineered transition on it

Set of 2 • 10 in 900 ANSI Engineered Test Heads with a Max Operating Pressure 2500 Psi. Designed to CSA Z662-11. These Test Heads have an engineered transition which is a 45 degree elbow and 600 Ansi Flange

Set of 2 • 16" 900 ANSI Engineered Test Heads with a Max Operating Pressure 2160 Psi. Designed to CSA Z662-11. These Test Heads have an engineered transition on them

Set of 2 • 16 in 900 ANSI Engineered Test Heads with a Max Operating Pressure 2160 Psi. Designed to CSA Z662-11. These Test Heads have an engineered transition on them

Set of 2 • 12" 900 ANSI Engineered Test Heads with a max operating pressure 2500 Psi. Designed to CSA Z662-15. These Test Heads have an engineered transition on them to make them usable on 8 in

Set of 2 • 10 in 900 ANSI Engineered Test Heads with a Max Operating Pressure 2160 Psi. Designed to CSA Z662-11. These Test Heads have an engineered transition on them

Set of 2 • 12 in 900 ANSI Engineered Test Heads with a Max Operating Pressure 2500 Psi. Designed to CSA Z662-11. These Test Heads have an engineered transition on them

(3) 20 Ton • (4) 17 Ton • (1) Unknown Ton

Set of 2 • 6" 900 ANSI Engineered Test Heads with a max operating pressure 2220 Psi. Designed to CSA Z662-15. These Test Heads have an engineered transition on them

Set of 2 • 4" 900 ANSI Engineered Test Heads with a max operating pressure 2220 Psi. Designed to CSA Z662-15. These Test Heads have an engineered transition on them to make them usable on 3" as well.

Renwrap • 2x Accuwrap

12 V Transfer Pump

STOPAQ Wrappingband

Honda 1 Cylinder Gasoline Engine • 240 V & 120 V Receptacles

Replacement Parts

Valves and Connecters

3 in Intake • 3 in Discharge • Centrifugal Honda GX270 1 Cylinder Gasoline Engine

O-Ring Kit • Wire • Air Fittings • Cotter Pins • Crimper • Hydraulic Porta Power

2 in Intake • 2 in Discharge • EX17 1 Cylinder Gasoline Engine

Reach Rods • Control Ends w/ Clamps

3 in Intake • 3 in Discharge • Centrifugal Honda GX240 1 Cylinder Gasoline Engine

2 in Intake • 2 in Discharge • Centrifugal Honda GX160 Gasoline Engine